Produkty

sonda do drewna
Probe for humidity measurment of wood Tramex
22 February 2016
sonda Hygro-i
Probe for humidity measurment of air
24 February 2016
Pokaż wszystkie
wilgotnosciomietrz tramex CMEXII

Moisture and humidity meter MRH III Tramex for wood


Catalogue number  08008

Catalog no.: 08008. Category: . Tagi: , , , , , .
Description

The MRH III operates on the principal of non-destructive impedance measurement. Co-planar electrodes are fitted on the base of the instrument from which low frequency signals are transmitted into the material under test, measuring the change in impedance caused by the presence of moisture. This reading is translated by the instrument into a moisture content reading.

Features:

  • Reads non-destructively 30mm (1 1⁄4”) deep in wood.
  • Adjustment of specific gravity for wood species correction.
  • Relative scale of 0-100 for other building materials including drywall, laminate, roofing and masonry products.
  • Plug in Heavy-duty pin-type electrode for invasive testing.
  • Plug in Hygro-i NEW reusable NIST traceable probe for Relative Humidity, Temperature, Dew Point and Mixing Ratio readings.

Hygrometer mode:

When the Tramex Hygro-i relative humidity probe is plugged into the MRH III, it automatically changes to Hygrometer Mode. The Tramex Hygro-i provides the ideal solution for measurements of ambient relative humidity, temperature and dew-point conditions within the building structure and in structural materials such as concrete flooring, walls etc.

Do you need some assistance?

Our consultants shall be honored to answer
your questions and any doubts.
You can contact us by phone: +48 667 00 45 45
or via e-mail: biuro@izoservice.pl