Produkty

Base piece for ram injection lance 1/4" with spearhead and openings 4 mm
Base piece for ram injection lance 1/4″ 1000 mm with spearhead and openings 4mm
24 February 2017
Perforated lance 50 cm for concrete filling
Perforated lance 50 cm for concrete filling
25 February 2017
Pokaż wszystkie
Lanca iniekcyjna
DESOI-Bild-7-300x300
Iniekcja_lancami
Iniekcja_lancami
Iniekcja_lancami
Lanca iniekcyjna

Base piece for ram injection lance 1/4″ 500 mm with spearhead and openings 4 mm


Catalogue number 01033

Catalog no.: 01033. Category: . Tagi: , .
Description

Ram injection lance is used when: – if it is necessary to fill voids in the ground with injection material – during renovations of the buildings – increasing the bearing capacity of the building ground – isolation layer in the ground should be created Ram injection lances are rammed into the ground with assistance of mounting tools.
Combined together from units with diameter 13,5mm with 0,5 and 1m length. Perforated units have holes with 4mm diameter.

Technical information:

Free passage 9 mm
Diameter of lateral openings 4 mm
External thread 1/4″
External diameter
13,5 mm
Length 0,5 m
Iniekcja_lancami
Do you need some assistance?

Our consultants shall be honored to answer
your questions and any doubts.
You can contact us by phone: +48 667 00 45 45
or via e-mail: biuro@izoservice.pl