Multi-mode moisture scanner for non-destructive moisture detection and leak tracing in the building envelope.
- For non-destructive moisture evaluation of Roofs, EIFS, Foam insulation
- systems & other Building envelope applications.
- For tracing leaks through the waterproofing membrane back to the source.
- Fast and easy to operate. Instant clear readings.
- “Hold” function facilitates ease of recording readings.
- Lightweight, hand-held and battery operated.
- Inexpensive to purchase and operate compared to other non-destructive
- testing methods
The Tramex RWS is an electronic hand-held moisture scanner and detector working on the principle of electrical impedance. With impedance measurement, harmless signals are transmitted from the electrodes at the base of the instrument deep into the thickness of the area under test. These signals measure the change in electrical impedance which is translated into a relative moisture content reading and instantly displayed on the clear large analog dial. Readings are instant and continuous. The RWS is also fitted with an audible device that increases in frequency at high readings. The RWS gives vital information necessary to evaluate and carry out moisture assessment on the condition of most fiber-reinforced EIFS wall cladding systems, roofing systems such as built up, non-conductive single ply, modified and foam roofing, at anaffordable cost and without complications.
